中文版 | ENGLISH
 
OUR PRODUCTS
Sodium Lignosulphonate-R
WWW.XZHCH.COM
Product Details

The lignin sulfonic acid sodium is a kind of anion surface-active agent made of sulphite whose main raw material is the northeast white pine, following the process of concentration, sugar-exclusion,displacement ,etc.

It is used in dyestuffs industry mainly. This product has many kinds of different function , for instance viscidity control , colour adjusted etc., but main function is the scattering of the dyestuffs, this product has hydrophilic and hydrophobia radicel. It creates double membrane layers when interacting with the moisture molecular .prevent the dyestuffs particle from condensing once again to improve grinding .


Usage

1. to use as dispersant,to determine the proportion of the dyestuffs and dispersant according to the strong degree of the dispersant, after confirming dispersant consumption,first half of the lignin sulfonic acid sodium dispersant first and dyestuffs are mixed until it ends, then put into another dispersant , this will get a better result than to all put all the dispersant together once .
2. to use as packing agent , may put in when spray dying or standardization.
3. the different kinds of dyestuffs or the same variety without the same factory, should have a test to determine the suitable dispersant dosage .

operation methods :
1. 0.2-0.5% of mixing amount in concrete (with cement weight), users can adjust the mixing amount through the test ;
2. Can use after mixed liquid , also can put with cement , aggregate into mixer to use at the same time too, need lengthen time properly;
3. the result is more obvious after mixing with high-efficient naphthalene department water-reducing agent. User can determine the suitable dosage according to the result that cement variety, aggregate situation, naphthalene department type of water-reducing agent are tested fixing;


Notice :
1. Strict control to avoid excessive dosage;
2. When the temperature lowers under 5 C° common concrete projects are not suitable using the chemical additive independently.
3. Experiment to make sure the dosage before use.


Standard Packing

the packaging: it has plastic pellicle inside and exteiorly packed with woven sacks ,net weight 25kgs each sack.

Storage: it shall be stored in a waterproof,rainproof place to avoid agglomeration,if there is agglomeration,smashing it or dissolving it will not affect using effect,the product is harmless and does not deteriorate in a long term .it's not a flammable and explosive substance.

Transportation: it's suitable for both truck and railway transportation,without any limit of remnant cargo or full truck ,we can arrange the consignment for shipment.

Shenyang Xingzhenghe Chemical Co., Ltd ICP: 05019562
Copyright © 2014 xzhch.com All Rights Reserved.